One with the "TH" mark can work under the condition of moist heat.
Operational travel
1.4～2.4mm
Rated values
Rated insulation voltage Ui
250V
Conventional thermal current Ith
5A
Utilisation category
Rated operational voltage Ue
24V
110V
220V
AC-15
Rated operational current Le
2A
1A
0.5A
DC-13
0.7A
0.2A
0.1A
Wiring diagram
Mounting method
1. Insert button head through mounting hole and fix it by tighting the screw nut ;
2. Connect the contact block to button head ; (there is a locking device -- locking dog #1#2)
3. Press locking dog #2 to take down the contact block.
Mounting hole size
Round/square pushbutton
Rectangle pushbutton
Mushroom/emergency stop pushbutton
Button with protective cover F-I
Button with protective cover F-II
Remark
1. Soldering-wiring should be avoided in switches wiring as possible.You'd better use universal patch-plug and cover with a cap.
2. Please note as soldering :
a. use 25W electric iron within 3 second by hand
b. auto-soldering at 240 within 3 second
Moreover,do not apply any force to the soldered terminal in 1 munite,then cover it with a protective cap.Please do not use flux to avoid
soldering,avoid any damege caused by flux penetrating indide.
3. The pushbutton should be operated by hand only.No other tools allowed!
